When the oil reaches the target temperature, slowly lower the turkey and basket into the fryer. Set the timer for 3 to 4 minutes per pound. For example, if you’re trying to decide how long to deep fry a 20 pound turkey, 3 x 20 = 60 minutes minimum. Turkey fry time for a 10 pound bird should be 30 to 40 minutes.
How long does it take to cook a 20lb turkey in oil?
The turkey should be placed in basket neck end first. Slowly lower basket into hot oil to completely cover turkey. Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 45 minutes. Carefully remove basket from oil, and drain turkey.
How long do you deep fry a 21 lb turkey?
Turkey Size (Pounds/lb)
| Turkey Size (Pounds/lb) | Deep Fry time (Minutes) at 350°F |
|---|---|
| 18 Pound Turkey | 63 Minutes (1 hour, 3 minutes) |
| 19 Pound Turkey | 66.5 Minutes (1 hour, 6.5 minutes) |
| 20 Pound Turkey | 70 Minutes (1 hour, 10 minutes) |
| 21 Pound Turkey | 73.5 Minutes (1 hour, 13.5 minutes) |
How long do you deep fry a turkey per pound?
Cook the turkey about 3 to 4 minutes per pound. The turkey is done when the dark meat is at an internal temperature of 175° F to 180° F and all white meat is at an internal temperature of 165° F to 170° F.
How long does it take to fry a 20 pound turkey at 300 degrees?
At this point, you will want to measure the temperature of the oil, which will drop when the turkey is first lowered into the pot. Keep the oil temperature above 300 degrees. In just a short time, the oil temperature will begin to rise again. Cook the turkey for 3 1/2 minutes per pound.
How long does it take to fry a 20 pound turkey at 350 degrees?
Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 35 minutes. Carefully remove basket from oil, and insert a meat thermometer into the thickest part of the thigh; the internal temperature must be 180 degrees F (80 degrees C).
Do you have to use peanut oil to fry a turkey?
The USDA notes that turkey needs to be fried at a temperature of 350 degrees Fahrenheit, so you need to use an oil that has a smoke point higher than 350 F. The USDA lists the smoke points of oils that can be used for deep-frying: … Soybean, safflower and peanut oil: 450 F.
How many gallons of oil does it take to fry a turkey?
Place the pot on the burner and clip the deep-fry thermometer to the side of the pot. Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot.
Can you deep fry a 20 lb turkey?
How Long Do You Deep Fry a 20 lb. Turkey? Since turkeys should be deep fried for 3 1/2 – 4 minutes per pound, a 20lb turkey will take 1 hour and 10-20 minutes.
Can you deep fry a frozen turkey?
Deep frying a turkey isn’t just for Thanksgiving. … Safety Tip: Never fry a frozen turkey, which can cause the hot oil to boil over, potentially leading to injury and fires. Make sure your turkey is completely thawed before frying.
What can I use my turkey fryer for?
A turkey fryer can sear and singe in seconds, keeping meats browned and tender, and vegetables crisp and tender. Use a well-seasoned steel or iron wok (or large cast-iron skillet) and cook on the patio, in the yard, driveway or poolside. Use a fryer for a shrimp boil by substituting water for oil.
Should you brine a turkey before deep frying?
The first step to make a delicious fried turkey is to make a good brine that will infuse the turkey with flavor before it cooks. … Place a thawed 12-15 pound turkey in the brine for 18-24 hours. Rinse then dry the brined bird. Remove any ties on the drumsticks; the turkey should be bare.
How many times can you use peanut oil after frying a turkey?
When cared for and stored properly, you can reuse peanut oil three to five times. Keep in mind that you’ll probably need to add fresh oil each time you deep fry a turkey to bring the oil level up to the amount needed for frying.