You’ll need enough oil to cover your entire turkey, but not so much that it spills over. A general guideline is to use 3 gallons of oil for a 30 qt. pot and 3 1/3 gallons of oil for a 32 qt. pot.
How long does it take to fry a turkey in oil?
The turkey should be placed in basket neck end first. Slowly lower basket into hot oil to completely cover turkey. Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 45 minutes. Carefully remove basket from oil, and drain turkey.
How long do you deep fry a 20lb turkey?
Fry turkeys that are 10 to 13 pounds for 3 minutes per pound, and for turkeys from 14 to 20 pounds, cook for 3 1/2 minutes per pound. A 10-pound turkey will take about 30 minutes. A 20-pound turkey will require about 1 hour, 10 minutes. Cook until the internal temperature reaches between 180 and 190 degrees Fahrenheit.
Can you mix oils to fry a turkey?
Mixing oil is fine, but beware that it’s going to burn at whatever temperature the easier to burn oil burns, not the average of the two. …
How much oil do you need to fry?
An adequate amount of oil or melted shortening for frying most foods is 1-1/2 to 2 inches (about 4 cups). This amount allows enough room to add the food. 2. For perfectly fried foods, you must keep the oil at the correct temperature.
What temperature should I fry my turkey?
Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 35 minutes. Carefully remove basket from oil, and insert a meat thermometer into the thickest part of the thigh; the internal temperature must be 180 degrees F (80 degrees C).
How many minutes per pound do you fry a turkey?
Set the timer and cook the turkey about 3 to 4 minutes per pound. Cook all dark meat to an internal temperature of 175° F to 180° F, and all white meat to an internal temperature of 165° F to 170° F. Here’s some help on how to check your turkey’s temperature for doneness.
Should I brine my turkey before frying?
FIRST The day before cooking turkey, prepare brine according to package directions. … NEXT Remove turkey from brine, pat dry, but do not rinse. Allow turkey to sit at room temperature for 30 minutes before frying. Fill fryer no more than 2/3 full with peanut, canola, or vegetable oil and heat oil to 325 degrees.
How much oil do I need to fry a 20lb turkey?
How Much Peanut Oil For Frying a Turkey?
Turkey Size | How Much Oil You Need |
---|---|
13 Pounds | 4-5 Gallons of Oil |
14 Pounds | 5 Gallons of Oil |
15 Pounds | 5 Gallons of Oil |
20 Pounds | 5-6 Gallons |
How big of a turkey will fit in a 30 quart fryer?
A 30-quart fryer can hold turkeys that are up to 20 pounds.
What is the best oil for frying a turkey?
Canola oil is recommended because of its high smoke point and low allergy concerns. The ideal frying temperature is 375°F. Once you submerge the turkey, the oil temperature will drop.
How much oil do I need to deep fry a 12 pound turkey?
Place the pot on the burner and clip the deep-fry thermometer to the side of the pot. Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot.
What oil has the highest smoking point?
Other oils that have high smoke points (400 degrees F and higher) include avocado oil (refined), almond oil, corn oil, canola oil, grapeseed oil, peanut oil, safflower oil, sesame oil and sunflower oil. These oils are better suited for cooking at higher temperatures.
How do you know when oil is ready to fry?
Finding the Oil Temperature
The easiest and safest method is to stick the end of a wooden spoon into the oil. If you see many bubbles form around the wood and they start to float up, your oil is ready for frying. If it is bubbling hard, the oil is too hot; let it cool a bit and check the temperature again.
How do you keep oil temperature when frying?
To maintain the proper oil temperature, use a clip-on deep-fry thermometer and keep close watch. If the oil starts lightly smoking, that’s a sign that it’s overheated and starting to break down; remove the pot from the heat until the oil cools to the correct temperature.
Why does oil foam up when frying?
When food is dropped into the hot oil, the moisture in the food rises to the surface to evaporate. This causes the characteristic bubbling of the oil, and when the associated moisture, starch, and impurities are left behind, they may create a foam on the surface. … Use an oil specifically designed for deep frying.