| Turkey Size (Pounds/lb) | Deep Fry time (Minutes) at 350°F |
|---|---|
| 18 Pound Turkey | 63 Minutes (1 hour, 3 minutes) |
| 19 Pound Turkey | 66.5 Minutes (1 hour, 6.5 minutes) |
| 20 Pound Turkey | 70 Minutes (1 hour, 10 minutes) |
| 21 Pound Turkey | 73.5 Minutes (1 hour, 13.5 minutes) |
How long does it take to deep fry a 20 pound turkey?
When the oil reaches the target temperature, slowly lower the turkey and basket into the fryer. Set the timer for 3 to 4 minutes per pound. For example, if you’re trying to decide how long to deep fry a 20 pound turkey, 3 x 20 = 60 minutes minimum. Turkey fry time for a 10 pound bird should be 30 to 40 minutes.
How long does it take to deep fry a 22 lb turkey?
Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 45 minutes. Carefully remove basket from oil, and drain turkey. Insert a meat thermometer into the thickest part of the thigh; the internal temperature must be 180 degrees F (80 degrees C).
How do you tell when a deep fried turkey is done?
Only the last two inches of the thermometer at the tip affect the reading, so push in only until you find the coldest part of the meat. When that reaches 170 degrees, you’re done. Don’t keep stabbing the meat with the thermometer, you’ll only let out moisture. Turn off the burner.
How many minutes per pound do you fry a turkey?
Cook the turkey about 3 to 4 minutes per pound. The turkey is done when the dark meat is at an internal temperature of 175° F to 180° F and all white meat is at an internal temperature of 165° F to 170° F.
Can you deep fry a 22 lb turkey?
Deep Frying
Now you’re ready for the main event: cooking the turkey. … Once the turkey has been submerged in the hot oil, cook for 3 to 3 1/2 minutes per pound. Fry turkeys that are 10 to 13 pounds for 3 minutes per pound, and for turkeys from 14 to 20 pounds, cook for 3 1/2 minutes per pound.
Do you have to use peanut oil to fry a turkey?
The USDA notes that turkey needs to be fried at a temperature of 350 degrees Fahrenheit, so you need to use an oil that has a smoke point higher than 350 F. The USDA lists the smoke points of oils that can be used for deep-frying: … Soybean, safflower and peanut oil: 450 F.
Can you deep fry a 20 lb turkey?
How Long Do You Deep Fry a 20 lb. Turkey? Since turkeys should be deep fried for 3 1/2 – 4 minutes per pound, a 20lb turkey will take 1 hour and 10-20 minutes.
Should you brine a turkey before deep frying?
The first step to make a delicious fried turkey is to make a good brine that will infuse the turkey with flavor before it cooks. … Place a thawed 12-15 pound turkey in the brine for 18-24 hours. Rinse then dry the brined bird. Remove any ties on the drumsticks; the turkey should be bare.
How long should turkey rest after frying?
After 35 minutes, check the temperature of the turkey using a probe thermometer. Once the breast reaches 151 degrees F, gently remove from the oil and allow to rest for a minimum of 30 minutes prior to carving. The bird will reach an internal temperature of 161 degrees F due to carry over cooking.
Why do you fry a turkey?
Deep-frying a turkey is a vastly superior option for countless reasons. The most important: Like everyone who’s ever tried it will tell you, it tastes better than roast turkey. The white meat is moister, the dark meat is even more flavorful, and the skin, while not always totally crispy, is never slimy and gross.
How much oil do I need to fry a turkey?
Place the pot on the burner and clip the deep-fry thermometer to the side of the pot. Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot.
How long do you fry a turkey at 300 degrees?
Keep the oil temperature above 300 degrees. In just a short time, the oil temperature will begin to rise again. Cook the turkey for 3 1/2 minutes per pound. For example, a 14-pound turkey should cook for 49 minutes, or 14 x 3.5 minutes.